Wooden gazebos were, and are still popular type of garden buildings. In the case of the gazebo is not only an aesthetic element of the garden. Gazebos are purely practical use. It protects not only against direct sunlight, but also the weather.
Wooden gazebos were, and are still popular type of garden buildings. In the case of the gazebo is not only an aesthetic element of the garden. Gazebos are purely practical use. It protects not only against direct sunlight, but also the weather.
Baseplate
Although considered a small
gazebo garden building is also needed for this project to have a good foundation. Fundamentals solved either by concrete pad or concrete footings that carry the construct arbor. In the case of load-bearing structures made of wood it is suitable wooden posts fixed to the frame handles footings.
Material suitable for floor gazebo
When choosing a floor pavilion should choose materials suitable for use in combination with a wooden structure. It is suitable stone tiles, tiles made of fired clay, wood tiles, wooden floor grate should be a classic floorboards.
Construction design requirements
When choosing a suitable gazebo it is good to notice and processing integrity of the wood. The wooden construction of the gazebo should not discover any cracks that continue to adversely affect the properties of wood. In addition, all edges of the frame gazebo should be rounded or chamfered to the water immediately drained away from the structure. It is not desirable or rough wood surface from which water evaporates wrong.
Chemical protection of wooden structures gazebo
Whether wood sebetvrdší and better, without chemical protection outside the building can not do. Chemical protection or preservation of wood increases its resistance to mildew and insects. Impregnation of wood is reduced absorbency and increase its hardness and durability of the construction arbor.
Surface treatment of wood construction arbor
The aim of finishing a gazebo, creating not only protective, but also aesthetic film that reduces direct contact with water, air, moisture and dust. Paints are divided into clear or covering. Furthermore, with increasing pigment reducing the effect of UV rays on the surface. Glazes are usually in the form of oil or water.
Paint application
Exterior coatings to resist, we must adequately apply and respect the temperature and humidity and drying time. If the coating dries at a lower temperature than 15 ° C it is necessary to allow for a longer drying time and is totally inappropriate to paint at temperatures below 5 ° C. Relative humidity should not exceed 80%. A single layer of primer is applied to the proper drying of the previous layer.
